10kV Cold Shrinkable Three Cores Straight Through Joint
  • 10kV Cold Shrinkable Three Cores Straight Through Joint10kV Cold Shrinkable Three Cores Straight Through Joint

10kV Cold Shrinkable Three Cores Straight Through Joint

The installation of 10kV Cold Shrinkable Three Cores Straight Through Joint is cold shrinkage construction, in the process of construction as long as the plastic wire core of the cable can automatically complete the contraction, without heating, this process is simple and practical, relative to the installation of heat shrinkage cable to eliminate the phenomenon of uneven shrinkage of insulation tube. When the heat shrinkable cable accessories are installed, the cable needs to be heated, which is easy to lead to uneven heating or no contraction at all, thus affecting the construction quality.

Send Inquiry

Product Description

10kV Cold Shrinkable Three Cores Straight Through Joint


1.Product Introduction 


Rubber is known to have "elastic memory" properties, like a spring. Such as our 10kV Cold Shrinkable Three Cores Straight Through Joint, Cold shrinkage technology, also known as pre-expansion technology, the elastic rubber in the elastic range of pre-support, set into the plastic support strip to be fixed. When installing, as long as the support strip is removed, the elastic body rapidly shrinks and tightens on the cable body. The cold shrinkage products manufactured by our company are all bonded with special sealing adhesive to make the overall sealing and avoid operation accidents caused by atmospheric environment. The silicone rubber used for raw materials has excellent insulation and high resilience, and will not cause electrical breakdown due to the breathing action of the cable during operation after installation. The products are widely used in electric power industry, communication industry, military industry, metallurgy, coal mining, petrochemical industry and other fields. 


10kV Cold Shrinkable Three Cores Straight Through Joint


The scope of use of the 10kV Cold Shrinkable Three Cores Straight Through Joint is suitable for 8.7/10kV, 8.7/15kV XLPE, Three Cores power cables. And the installation environment of the 10kV Cold Shrinkable Three Cores Straight Through Joint should be dust-free, with a temperature above 0℃, and a relative humidity of 75% or less. The 10kV Cold Shrinkable Three Cores Straight Through Joint Installation acceptance test standards and operation supervision shall be carried out in accordance with relevant regulations. 


10kV Cold Shrinkable Three Cores Straight Through Joint factory


Our products, including 10kV Cold Shrinkable Three Cores Straight Through Joint, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.

10kV Cold Shrinkable Three Cores Straight Through Joint certificate


2.Product Parameter (Specification) 


Technical Specification

Test Item

Parameters

Wet Power Frequency Withstand Voltage Test (Outdoor)

35kV/1min

Dry Power Frequency Withstand Voltage Test (Indoor)

39kV/5min

Impact Pressure Test

95kV 1.2/50μ+10times

Partial Discharge Test

≤10pc(1.73Uo)


There are four common technical parameters for the 10kV Cold Shrinkable Three Cores Straight Through Joint. As for our 10kV Heat Shrinkable Three Cores Straight Through Joint, the Dry Power Frequency Withstand Voltage Test is 39kV/5min. And the Impact Pressure Test is 95kV 1.2/50 μ+10times. And the Partial Discharge Test is ≤10pc(1.73Uo). These parameters of our 10kV Heat Shrinkable Three Cores Straight Through Joint are qualified and excellent. So you can rest assured purchase, if you have specific parameter requirements, please contact our agents, we will help you as soon as we received your request.

3.Product Feature And Application 


1.Full shrinkage automatic reset technology, installation without special tools, construction and installation is simple and quick;
2.No open flame, no heating, safe and reliable;
3.The cable body has persistent radial pressure, good sealing and waterproof, to ensure long-term reliable operation.

4.Product Details 


The Material list /Specific contents of the 10kV Cold Shrinkable Three Cores Straight Through Joint

Item

Components

Unit

Single core

Three cores

Remark

1

Joint tube

pc

1

3

 

2

Composite waterproof tape

bag

2

6(7)

 

3

Armour tape

roll

2

4(5)

 

4

Constant force spring

pc

2

8

2 large 6 Small

5

Copper mesh

pc

1

3

 

6

Semi-conductive tape

roll

2(3)

6

 

7

Shield earth braid

pc

1

3

 

8

Armour earth braid

pc

-

1

 

9

Water-proof sealing mastic

bag

1

2

 

10

Silicone grease

bag

1

2

 

11

PVC tape

roll

1

5

 

12

Abrasive paper

pc

2

6

 

13

Glove

pair

2

2

 

14

Cleaning tissue

bag

2

6

 

15

Measure tape

pc

1

1

 

16

Knife

pc

1

1

 

17

Paper ruler

pc

1

1

 

18

Bandage

pc

1

2

 

19

Installation instruction

pc

1

1



10kV Cold Shrinkable Three Cores Straight Through Joint


5.Product Qualification 


Cold shrinkage cable accessories is the use of elastomer materials (commonly used silicone rubber and ethylene propylene rubber) in the factory injection vulcanization molding, and then through expanding, lined with plastic spiral support to form a variety of cable accessories. During field installation, these preexpansion pieces are put on the treated cable ends or joints, and the plastic spiral strips (supports) of internal support are drawn out and pressed on the cable insulation to form cable accessories. Because it is at room temperature by elastic shrinkage force, rather than like heat shrinkage cable accessories to heat shrinkage with fire, so commonly known as cold shrinkage cable accessories. The product is waterproof, stress control, shielding, insulation in one, can be used in a variety of harsh environmental conditions for a long time. Widely used in Electric Power Industry, Petroleum Industry, Chemical Industry, Metallurgy, Railway, Port, Construction and other fields.


10kV Cold Shrinkable Three Cores Straight Through Joint equipment


Our products, including 10kV Cold Shrinkable Three Cores Straight Through Joint, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.

10kV Cold Shrinkable Three Cores Straight Through Joint test report


6.Deliver, Shipping And Serving


1. Your inquiry will be replied within 24 hours.
2. We offer you professional service in fluent English.
3. Keep the mass production as the sample in high quality
4. Freight forwarder: faster, safer, and convenient.
5. Quality: we have QC on each process,provide high quality products.
Any problem or needed please feel free let us know, we are glad to service for you
We are factory, we can provide competitive price. And all the products will be shipped after quality inspection. Usually we quote within 24 hours after we get your inquiry. If you can not buy our product in your local area, we will ship a sample to you (Please contact our agent or send email to our mailbox).


10kV Cold Shrinkable Three Cores Straight Through Joint packing


7.FAQ

Q1: Are you a factory or trading company?
A1: We are a factory, we can provide competitive price.

Q2: How does your factory do regarding quality control?
A2: All the products will be 100% checked before the shipment.

Q3: When can I get the price?
A3: Usually we quote within 24 hours after we get your inquiry.

Q4: How could I get a sample?
A4: If you can not buy our product in your local area, we will ship a sample to you.You will be charged a sample price plus all related shipping costs.Express delivery charge depends on the quantity of the samples.

Q5: Why choose us?
A5: Welcome to our company, we are a group of creative people.
1.High quality is our obligation
2.Customer first, contact us now!
3.Great service is our mission!
4.Quality is the essence, wealth is the fruit.
5.Your opinion is the driving force of our progress.
6.A smile on your face and a service in your heart.

Hot Tags: 10kV Cold Shrinkable Three Cores Straight Through Joint, China, Cheap, Quality, Bulk, Manufacturers, Suppliers, Factory, Quotation, In Stock

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept