General steps for the installation of cable termination kit

In the power system, the installation of the cable termination kits is a crucial link, which is related to the stable operation of the cable and the safety of the power supply. This article details how to properly and efficiently install the cable termination kit to ensure its performance and safety.

1. Preliminary preparation

Before installation, check the cable comprehensively, including its appearance and insulation resistance, to ensure that the cable is free of damage and defects. In addition, prepare the tools and materials required for the installation, such as gloves, cable end accessories, and insulation tapes.

2. installation steps

a. Peel off the outer sheath of the cable: According to the model and size of the cable, use a proper tool to peel off the outer sheath of the cable to expose the internal insulation layer. In this process, care should be taken to protect the internal insulation layer from damage.

b. Fix the cable terminal: Fix the cable terminal in the predetermined position to ensure its stability and firmity. It can be secured using a tool such as a bracket or hoop.

c. Peel off the cable insulation layer: Peel off a certain length of insulation layer at the end of the cable to expose the internal conductive wire core. Caution should be exercised during stripping to avoid damage to the core.

d. Connect the cable core: Connect the conductive wire core of the cable to the wiring terminal of the terminal to ensure that the connection is secure and conductive. It can be secured with appropriate screws or crimping pliers.

e. Install insulation pipes and sealing rings: Install insulation pipes and sealing rings at the connection to protect the connection from the external environment and improve its insulation performance.

f. Fill insulation glue: Fill the gap between the cable and the terminal head with an appropriate amount of insulation glue to enhance its insulation performance and mechanical strength.

g. Install the outer sheath: Install the outer sheath on the outside of the cable termination to connect it with the outer sheath of the cable to form a complete protective layer. Materials such as waterproof tape or heat shrink tubes can be used for sealing.