Product

Red 10kV and 35kV Bus-bar Tube
The Red 10kV and 35kV Bus-bar Tube is made of special polythin hydrocarbon through special processing, with high insulation performance, used for substation bus, high and low voltage switchgear bus insulation protection, bus-bar can make the switchgear compact structure (phase distance shortened), to prevent accidental short circuit accidents.
Read More Send Inquiry
Green 10kV and 35kV Bus-bar Tube
The Green 10kV and 35kV Bus-bar Tube is made of special polythin hydrocarbon through special processing, with high insulation performance, used for substation bus, high and low voltage switchgear bus insulation protection, bus-bar can make the switchgear compact structure (phase distance shortened), to prevent accidental short circuit accidents.
Read More Send Inquiry
15kV Bushing Extender Red
The 15kV Bushing Extender Red is mated with the conversion head to form a 600A/200A conversion head with extension bush, which can be installed directly on the 600A bus-bar or 600A bushings. The 200A jack can be installed with elbow surge arrester or elbow cable connector. The 15kV Bushing Extender Red is made of high quality EPDM (EPDM), fully insulated and sealed.
Read More Send Inquiry
1kV Cold Shrink Four Cores Straight Through Joint Kit
The installation of 1kV Cold Shrink Four Cores Straight Through Joint Kit is cold shrinkage construction, in the process of construction as long as the plastic wire core of the cable can automatically complete the contraction, without heating, this process is simple and practical, relative to the installation of heat shrinkage cable to eliminate the phenomenon of uneven shrinkage of insulation tube. When the heat shrinkable cable accessories are installed, the cable needs to be heated, which is easy to lead to uneven heating or no contraction at all, thus affecting the construction quality.
Read More Send Inquiry
1kV Cold Shrink Five Cores Termination Kit
The installation of 1kV Cold Shrink Five Cores Termination Kit installation procedures from one end to the other side of the construction, the construction process cannot be changed, the process is very difficult to have a bubble will appear in the cable pipe, therefore the construction quality is higher, the construction of hot shrinkage is different, heat from one end to the other side, it is easy to result in uneven heating, which leads to the generation of air bubbles, seriously affect the construction quality.
Read More Send Inquiry
35kV Cold Shrink Single Core Termination Kit for Outdoor
The 35kV Cold Shrink Single Core Termination Kit for Outdoor has the advantages of small size, easy operation, rapid, no special tools, wide range of application and less product specifications. Compared with the heat-shrinkable cable accessories, it does not need to be heated by fire, and moving or bending after installation will not be as dangerous as the heat-shrinkable cable accessories. (Because the end of the cold-shrinkable cable depends on the elastic compression force).
Read More Send Inquiry