15kV Hybrid Bus-bar
  • 15kV Hybrid Bus-bar15kV Hybrid Bus-bar

15kV Hybrid Bus-bar

600A bus-bar acts as bus-bar in the cable branch line. It can combine T cable joint, T -II cable joint, 600A extension tube and 600A insulation cap as a cable branch lines. 600A/ 200A hybrid bus-bar gathers 200A and 600A bolt type of bus-bar interface. The 15kV Hybrid Bus-bar is made of high quality EPDM. It has the characteristics of the insulation, fully sealed. With T type cable joint, T - type cable joint or elbow cable joint connection, configuration is varied.

Send Inquiry

Product Description

15kV Hybrid Bus-bar


1.Product Introduction 


The 15kV Hybrid Bus-bar is connected to the elbow-type cable connector or elbow-type lightning arrester, and the reserved port is sealed with 200A insulation cap. The 600A insulation cap is used to seal the 600A bus elbow-type lightning arrester with the t-shaped connector removed from the reserved port of the 600A bus or to connect the elbow-type lightning arrester with the double-pass and 200A bus connection plate to provide overvoltage protection. The 15kV Hybrid Bus-bar used in belt SF6 load switches and cable branch box, flexible structure, meet a variety of connection type, divide into two kinds, European and American have two-way, tee, four-way, comparable to 200, a joint 600 a joint, 600 a, 200 a umbrella skirt connector (for 630 a European plug), by cross and t-joint is connected to a switch wiring, Achieve full insulation, full sealing. The 15kV Hybrid Bus-bar test point can install live display to check the live status of the equipment and meet the requirements of the nuclear phase of the line. It can be operated with live, but cannot cut off short circuit current. It's suitable for XLPE cable with sectional area 25mm2~150mm2. It can be used as load switch to switch off 200A current.


15kV Hybrid Bus-bar


The 15kV Hybrid Bus-bar is used to connect switch cabinet, cable branch box, inlet and outlet bushing and other equipment. HUYI in accordance with the brand of cable accessories and heat shrinkable products through constant research and development of science and technology, has reached the domestic and international most advanced level, at home and abroad enjoys a high reputation, the products sell well all over the country and world. Our 15kV Hybrid Bus-bar full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.


15kV Hybrid Bus-bar factory


Our products, including 15kV Hybrid Bus-bar, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.

15kV Hybrid Bus-bar certificate


2.Product Parameter (Specification) 


Technical Specification

Test Item

12kVParameters

24kVParameters

35kVParameters

Nominal Voltage

8.7kV

15.2kV/26.3kV

26kV/35kV

Power Frequency Withstand Voltage

42kV/1min

55kV/5min

117kV/5min

DC Withstand Voltage

53kV/15min

78kV/15min

104kV/15min

Lightning Shock Withstand Voltage

95kV

125kV

215kV

Partial Discharge Voltage <10PC

13kV

22kV

45kV


All the parameters of the 15kV Hybrid Bus-bar are in conformity with the requirements and qualified.

3.Product Feature And Application 


Executive Standard
*DIN47636.7.1990 with Power cable detachable accessory set protruding from cone, dimensions of tube and separable coupling devices Um up to 35kV;
*ANSIIEEE592-1900 Exposed semiconductor sheath for high voltage cable joints and separable insulated connectors;
*IEC60502 Extruded insulated power cables and accessories for rated voltage from 1kV (Um=1.2kV) to 30kV (Um=35kV);
*IEC61442 Test method for accessories of power cables with rated voltage from 6kV (Um=7.2kV) to 30kV (Um=35kV);
*GB12706-2002 Extruded insulated power cables and their accessories for rated voltage 1kV (Um=1.2kV) to 35kV (Um=40.5kV);
*GB311.1-1997 High voltage transmission and distribution equipment insulation coordination;
*GB/41.9-1999 Technical conditions of high pressure casing;
*GB11032-2010 Ac non - gap metal oxidation arrester;

4.Product Details 


The details of the 15kV Hybrid Bus-bar 

15kV Hybrid Bus-bar


5.Product Qualification 


The 15kV Hybrid Bus-bar has compact structure, small footprint, easy installation, convenient operation and maintenance free. The 15kV Hybrid Bus-bar has an outdoor all-weather, fully protective structure. Suitable for high temperature, cold, flood immersion, high dust area. Fully sealed, fully insulated structure, no insulation distance, effectively ensure personal safety. The 15kV Hybrid Bus-bar can be flexibly combined to make the outlet branch number up to seven, and can be combined with the load switch to form a ring network power supply, fully meet a variety of wiring requirements. The 15kV Hybrid Bus-bar can be used as a switch with load plug. After installing fault indicator, cable fault can be detected quickly.


15kV Hybrid Bus-bar equipment


Our products, including 15kV Hybrid Bus-bar, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.

15kV Hybrid Bus-bar test report


6.Deliver, Shipping And Serving 

1. Your inquiry will be replied within 24 hours.
2. We offer you professional service in fluent English.
3. Keep the mass production as the sample in high quality
4. Freight forwarder: faster, safer, and convenient.
5. Quality: we have QC on each process,provide high quality products.
Any problem or needed please feel free let us know, we are glad to service for you
We are factory, we can provide competitive price. And all the products will be shipped after quality inspection. Usually we quote within 24 hours after we get your inquiry. If you can not buy our product in your local area, we will ship a sample to you (Please contact our agent or send email to our mailbox).


15kV Hybrid Bus-bar packing


7.FAQ

Q1: Are you a factory or trading company?
A1: We are a factory, we can provide competitive price.

Q2: How does your factory do regarding quality control?
A2: All the products will be 100% checked before the shipment.

Q3: When can I get the price?
A3: Usually we quote within 24 hours after we get your inquiry.

Q4: How could I get a sample?
A4: If you can not buy our product in your local area, we will ship a sample to you.You will be charged a sample price plus all related shipping costs.Express delivery charge depends on the quantity of the samples.

Q5: Why choose us?
A5: Welcome to our company, we are a group of creative people.
1.High quality is our obligation
2.Customer first, contact us now!
3.Great service is our mission!
4.Quality is the essence, wealth is the fruit.
5.Your opinion is the driving force of our progress.
6.A smile on your face and a service in your heart.

Hot Tags: 15kV Hybrid Bus-bar, China, Cheap, Quality, Bulk, Manufacturers, Suppliers, Factory, Quotation, In Stock

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept